Dell戴尔SAS 6/iR RAID状态

在Dell戴尔1950与R410上测试RAID卡通过,系统为Centos 6.4 64bit

查看控制器是否LSI Logic

  1. lspci -v| grep SCSI
  2. 02:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)

用lsiutils查询控制器状态,megacli无法用于此类控制器。

  1. wget http://mirror.cogentco.com/pub/misc/lsiutil.x86_64 && chmod 700 lsiutil.x86_64
  2. ./lsiutil.x86_64 1
  3.  
  4. LSI Logic MPT Configuration Utility, Version 1.60, July 11, 2008
  5.  
  6. 1 MPT Port found
  7.  
  8.      Port Name         Chip Vendor/Type/Rev    MPT Rev  Firmware Rev  IOC
  9.  1. /proc/mpt/ioc0    LSI Logic SAS1068E B3     105      00192f00     0
  10.  
  11. Current active firmware version is 00192f00 (0.25.47)
  12. Firmware image's version is MPTFW-00.25.47.00-IE
  13.   LSI Logic
  14. x86 BIOS image's version is MPTBIOS-6.22.03.00 (2008.08.06)
  1. wget ftp://ftp.pbone.net/mirror/ftp5.gwdg.de/pub/opensuse/repositories/home:/aevseev/CentOS_CentOS-6/x86_64/mpt-status-1.2.0-6.3.x86_64.rpm
  2. rpm -ivh mpt-status-1.2.0-6.3.x86_64.rpm
  3. #需要daemonize.x86_64
  4.  
  5. [root@localhost]# mpt-status
  6. ioc0 vol_id 0 type IM, 2 phy, 278 GB, state OPTIMAL, flags ENABLED
  7. ioc0 phy 1 scsi_id 9 SEAGATE  ST3300657SS      ES64, 279 GB, state ONLINE, flags NONE
  8. ioc0 phy 0 scsi_id 1 SEAGATE  ST3300657SS      ES64, 279 GB, state ONLINE, flags NONE

一条评论

  1. 拷贝回去, 看debian能不能使用